Hst Tractor with Front Loader and Backhoe

Product Details
Customization: Available
After-sales Service: 3 Years
Warranty: 3 Years
Diamond Member Since 2020

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Registered Capital
1000000 RMB
Plant Area
1001~2000 square meters
  • Hst Tractor with Front Loader and Backhoe
  • Hst Tractor with Front Loader and Backhoe
  • Hst Tractor with Front Loader and Backhoe
  • Hst Tractor with Front Loader and Backhoe
  • Hst Tractor with Front Loader and Backhoe
  • Hst Tractor with Front Loader and Backhoe
Find Similar Products

Basic Info.

Model NO.
B4030
Usage
Farm Tractor, Garden Tractor, Lawn Tractor
Certification
CE, EPA, EEC
Drive Wheel
4WD
Emission Standard
Eurov / EPA T4
Fuel
Gas / Diesel
Service Life
6-10 Years
Size
Small
Color
Red
Condition
New
Transport Package
Iron Frame
Specification
25-45hp
Trademark
LAND X
Origin
China

Product Description

SPECIFICATION TABLE
 
Model B4030HST
PTO power kW (HP) 25.7/35






Engine
Maker XINGCHAI
Model XY477-E5
Type Indirect Injection. Vertical, water-cooled 4 cycle diesel,4 cylinder
Number of cylinders 4
Bore and stroke mm (in.)   78x78.4 (    3. 1x3. 1)
Total displacement cm  (cu.in.) 1498 (91.5)
Engine gross power kW (HP) 29.5 (40.0)*
Rated revolution rpm 3500
Low idling revolution rpm 1000-1100
Maximum torque N-m (ft-lb) 98.7 (72.7)
Battery 12 V, RC : 80 min, CCA : 430 A

Capacities
Fuel tank L (U.S.gals.) 31 (8. 1)
Engine crankcase (with filter) L (U.S.qts.) 4. 1 (4.3)
Engine coolant L (U.S.qts.) 5.2 (5.5)
Transmission case L (U.S.gals.) 15 (4.0)



Dimensions
Overall length (without 3P) mm (in.) 2640 (103.9)
Overall width (min. tread) mm (in.) 1365 (53.7)
Overall height mm (in.) 2150 (84.6)
Wheel base mm (in.) 1666 (65.6)
 
  Minimum ground clearance mm (in.) 370 (14.6)
Tread Front mm (in.) 935 (36.8)
Rear mm (in.) 1050 (41.3)
Weight (with ROPS or CAB) kg (lbs.) 1030 (2271)
Clutch N/A


Traveling system
Tires Front 7-12
Rear 12.4-16
Steering Hydrostatic type power steering
Transmission 3 stage Main-hydrostatic transmission,
3 range gear shift (3 forward, 3 reverse)
Brake Wet disk type
Minimum turning radius (with brake) m (feet) 2. 1 (6.9)
 


Hydraulic unit
Hydraulic control system Position control
Pump capacity L / min (gals / min) 3P: 19.7 (5.2),
Power steering: 14.8 (3.9)
Three point hitch SAE Category 1
Max. lift force At lift points kg (lbs.) 970 (2139)
24 in.behind lift point kg (lbs.) 760 (1676)

PTO
Rear-PTO SAE 1-3/8, 6 splines
PTO / Engine speed rpm 1 speed    540 / 2592
Mid-PTO USA No. 5 (KUBOTA 10-tooth) involute spline
PTO / Engine speed rpm 1 speed      2500 / 2600
 
Model B4030
Tire size (Rear) 12.4 - 16 13.6 - 16
  Range gear shift lever km / h mph km / h mph
Forward Low 0 to 5.0 0 to 3. 1 0 to 5.2 0 to 3.2
Middle 0 to 9.4 0 to 5.8 0 to 9.6 0 to 6.0
High 0 to 19.5 0 to 12. 1 0 to 20.0 0 to 12.4
Reverse Low 0 to 4.0 0 to 2.5 0 to 4. 1 0 to 2.6
Middle 0 to 7.4 0 to 4.6 0 to 7.6 0 to 4.7
High 0 to 15.5 0 to 9.6 0 to 15.9 0 to 9.9
The company reserves the right to change the specification without notice.
Hst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and BackhoeHst Tractor with Front Loader and Backhoe

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier